Every year, around this time, CMOs are jockeying for marketing budget, while CFOs are justifying their existence. The best way to please your CFO is to tie marketing to revenue outcomes, which will justify why this budget is a value driver and not a cost center.
Sounds easy, right? It's not.
From our experience, supported by data, sales and marketing have shockingly little alignment on planning. Gartner found the two functions work together on only 3 of 15 commercial activities, and 90% of their leaders say their priorities conflict. Despite being on the same team, sometimes it seems like they are even at odds with each other. There are a handful of ways to skin the cat on media budget. If you are a marketing leader in a sales-driven org that drives pipeline through leads and SDRs, then this little primer may help.
While we can't immediately solve the yawning gap between your in-platform conversions and CRM attribution, we can help figure out how much you should budget for the calendar year, based on pipeline objectives.
Here's the method in one paragraph. Start your media plan from next year's revenue target and work backward: divide by your average contract value to get the deals you need, then use your own CRM's close rates to get the opportunities, sales-qualified leads (SQLs) and leads behind those deals. Price the leads at the cost your CRM confirms, move the spend earlier by your time to close, and check the lead count against what your sales team can work before you fund it.
Most budgets we see in planning season were set another way. The CRO has a revenue number. The CMO has a budget that is last year's plus or minus a percentage. Neither number was derived from the other, so when a quarter slips, the budget is what the CMO, CRO and CFO argue about. A plan built from the revenue target gives all three the same arithmetic, and it is the clearest way to show a CFO that media spend is tied to revenue.
Below is the method, step by step, with one example carried all the way through. The company and every number in it are illustrative. Use your own rates; our funnel calculator runs the same arithmetic on your numbers.
How many deals does the revenue target require?
Divide your new-business revenue target by your average contract value. That is the number of deals sales has to close.
Our illustrative company needs $6 million in new-business revenue next year. Its average contract value is $120,000.
$6,000,000 ÷ $120,000 = 50 deals.
Use new business only. Renewals and expansion have their own funnels, and folding them in makes paid media look responsible for revenue it never touched.
How many opportunities do 50 deals take?
Divide the deals by your opportunity-to-close rate, taken from the last four quarters in your CRM.
Our company closes 25% of its opportunities.
50 ÷ 0.25 = 200 opportunities.
How many SQLs become 200 opportunities?
Divide by your SQL-to-opportunity rate.
Half of our company's sales-qualified leads become opportunities.
200 ÷ 0.50 = 400 SQLs.
How many leads does it take to get 400 SQLs?
Divide by your lead-to-SQL rate.
Our company qualifies 10% of its leads.
400 ÷ 0.10 = 4,000 leads.
Paid media is not the only source. In our example, outbound, referrals and partners produce 40% of leads, so paid media is asked for the other 60%.
4,000 × 0.60 = 2,400 leads from paid media.

Step | Rate | Result |
|---|---|---|
Revenue target | $6,000,000 | |
÷ Average contract value | $120,000 | 50 deals |
÷ Opportunity-to-close | 25% | 200 opportunities |
÷ SQL-to-opportunity | 50% | 400 SQLs |
÷ Lead-to-SQL | 10% | 4,000 leads |
× Paid media's share | 60% | 2,400 paid leads |
Illustrative. Every rate here should come from your own CRM.
Use your rates, even if they look bad. A benchmark lead-to-SQL rate from an industry report will make the plan look cheaper than it is, and the gap shows up in the third quarter.
What will those leads cost?
Multiply the paid leads by the cost per lead your CRM confirms, which is usually higher than the one the ad platform reports. You don't have to close the gap between platform conversions and CRM attribution to plan; you only have to plan at the CRM's number.
The platform counts every form fill it can claim. Your CRM counts the leads that turned out to be real people at companies you sell to. Bidding optimizes to the platform's number, and the budget pays the CRM's. We wrote about why the gap matters for bidding in bad conversion data trains the algorithm.
Our company's platforms report a $180 cost per lead. After removing duplicates, students, competitors and junk, the CRM-confirmed cost is $250.
2,400 × $250 = $600,000 in paid media.
Planned at the platform's $180, the same plan would have asked for $432,000 and come up about 670 leads short.
When does the money have to be spent?
Move the spend earlier by your average time to close. A lead produces revenue months after it arrives, so the leads behind this year's revenue arrive well before the year ends.
Our company's deals take six months from first touch to close. A lead that arrives in March closes, if it closes, around September. So:
Revenue that closes from January to June comes from leads that arrived last July through December. That pipeline already exists. Check it now, because no spend this year can change it.
Revenue that closes from July to December needs leads that arrive from January to June.
Spend in the second half of this year mostly buys next year's revenue.

An even monthly budget across the calendar year puts half of the money in months that cannot affect this year's number. If this year's target is the one you're held to, front-load the spend into the first two quarters and plan the second half as next year's pipeline.
Can your sales team work that many leads?
Divide the annual lead count by 52 and compare it with the number of leads your sales team can follow up on in a week. If the plan produces more than sales can work, cut volume or change the mix before you spend.
Our company needs 4,000 leads a year from all sources, about 77 a week. Its sales development team can properly work 50 a week.

That gap is about 1,400 leads a year that nobody calls. In paid media, those leads still cost $250 each. They also drag the lead-to-SQL rate down, which makes next year's plan look even more expensive.
There are three ways to close the gap: add sales capacity, accept fewer leads and a lower revenue target, or buy better leads. The third usually costs the least. Suppose tighter targeting and a higher-intent offer raise lead-to-SQL from 10% to 15%:
400 SQLs ÷ 0.15 = 2,667 leads a year, about 51 a week. Sales can work that.
Paid media's 60% share is 1,600 leads.
Better leads cost more. At a confirmed $375 per lead, 1,600 × $375 = $600,000.
The budget stays at $600,000, paid leads drop by a third, and sales can call every one. Getting there means marketing and sales agreeing on what a qualified lead is, so have that conversation before the budget is approved.
How should the budget be split?
Split the budget by the stage of the buyer's decision, and give the most to the stage with the best confirmed evidence from your CRM. Channels come after, as the way each stage is bought.
For one enterprise warehouse-technology company, we split the 2027 paid budget four ways:
Trust (30%): reaching the buying committee before they are in market, so the company is known when the need arrives.
Vertical proof (25%): case evidence for the specific industries the company sells into.
Capture (35%): search and intent channels for buyers already looking. Capture gets the largest share because non-brand search beat brand search on sales-accepted leads in that company's CRM.
Event reserve (10%): held back. The second event is funded only after the first one is reviewed with sales, and any reserve left at mid-year moves into always-on spend.
Two details from that plan carry over to most companies. Its SQL target is set in January from the fourth quarter's actual CRM SQLs, not from a market benchmark. And its first task in December is fixing lead tracking, because the plan can't be measured until CRM stages flow back to the ad platforms.
If you want the brand-versus-demand side of this split argued in full, see how to split a B2B marketing budget between brand and demand gen. For the budget structure around paid media, see how to structure a B2B marketing budget.
How do you keep the plan current?
Review SQLs from the plan every month with sales, and rerun the arithmetic whenever a rate moves.
Every number in this plan is a rate from last year applied to next year. Some will be wrong. When opportunity-to-close drops from 25% to 20%, the company in our example needs 250 opportunities instead of 200, and the plan has to find 100 more SQLs or the revenue target has to move. If the monthly review catches that in April, there are still two quarters of spend to adjust. Bring the same review to your CFO: spend in, SQLs and pipeline out, against the plan they approved.
Measure marketing's part with the same CRM stages the plan was built on; how to measure pipeline contribution from marketing covers how. If marketing and sales don't yet share the target, start with should marketing and sales share pipeline targets.
To run the numbers for your company, open the funnel calculator and put in your own target, contract value and rates.
Tell us where you are. We’ll tell you what we can do.
